|
|
Flag CopperQuick Antifouling 2.5L
A low friction semi-hard antifouling based on a PTFE resin and an extremely fine grade of copper. CopperQuick is easier to scrub and being a relatively thin film will not create build-up like many conventional antifoulings. This product is pre-mixed (only requires good stirring to ensure homogeneity before use) and easy to apply. The quick drying nature of this product allows for minimal out of water time. If required extra coats can be applied and re-launching can be achieved inside a day. 2 or 3 coats are normally required dependent on the base condition. Performance PTFE is self-priming and can be applied over any pervious PTFE based or hard antifouling. Traditional (softer) antifoulings should be removed prior to the application of Performance PTFE. Particularly suitable for fast power or sail craft in low to medium fouling areas.
Specifications:
- Area of use: Boat hulls below the waterline
- Substrates: GRP, wood, steel and ferro cement. Not suitable for aluminium or galvanised surfaces
- Size: 2.5 litres
- Colour: Copper
- Finish: Semi-matt
- Volume solids: 47%
- Theoretical spreading rate: 12 m²/lt
- Flash point: 42ºC
- Specific gravity: 1.16
- Dry touch: 1-2 hours
- Over-coating time: 4 hours
Application Details:
- Method: Sponge or short hair roller / conventional spray / airless spray
- Thinners: Flag Antifouling Thinners
- Surface condition: The surface should be smooth, stable firm, dry and free of dust, sand loose old paint, dirt, grease, oil and salt
|
|
|
|
|
|
