|
|
Ball Bearing Complete Traveller System For Yachts Up To 11m - 4:1 Purchase
Ball Bearing Complete Traveller System
A ball bearing complete traveller system with 4:1 purchase incorporating a 70 degree angle cleat on ends.
The sliding bolt track allows for a smooth clean profile with no visible fastenings. It also makes retro-fitting an easier job as bolts can be slid along the extrusion to match existing fastening holes. Ensure washers are fitted beneath track to create a secure seal.
Specifications:
- To suit boats up to: 11m
- Maximum control line size: 8mm
- Fastening size: 6mm hex bolts
- Width: 70mm
- Safe Working Load: 700kg
Contents
- 1.6m sliding bolt track
- Plastic end caps
- Traveller End Fitting
- Fitting Instructions
- Pilot Track
Care must be taken when fitting track to ensure traveller does not slide off end of track. This could result in ball bearings being displaced from bearing galleries.
|
| Barton | 24901 | | Plastimo | 186335 |
|
|
|
|
